Tool kit

(depending on the vehicle)

To access the tool kit 1, raise the luggage compartment carpet Luggage compartment storage.

Tool box

To access the tool box, unlock the mounting(s) 2 by one quarter of a turn, then remove the flap 3.

The tool box is held in place by a strap.

The presence of the tools depends on the vehicle.

Jack 5

On vehicles equipped with a tool kit, push towards the front of the vehicle the 4 clip on the tool kit and remove the jack.

Fold the jack correctly before refitting it in its housing (ensure that the wheelbrace 6 is correctly positioned).

Hubcap tool 7

This tool is used to remove the wheel trims.

Screw guide 8

For tightening/loosening wheel bolts on vehicles fitted with alloy wheels

Tow eye 9

Towing: breakdown

Wheel wrench 10

Locks or unlocks the wheel bolts and towing eye 9.

warning

Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing to reduce any risk of injury.

If wheel bolts are supplied in the tool kit, only use these bolts for the emergency spare wheel: refer to the label affixed to the emergency spare wheel.

warning

For safety reasons, the use of a jack not recommended by the manufacturer is strictly forbidden.

The jack is specific to the vehicle and used to change the wheels.

Under no circumstances should it be used:

  • on another vehicle;
  • to carry out a repair;
  • to access the underside of the vehicle.

Risk of injury.

Risk of damage to the vehicle.