Renault Austral
Front seats
To move the seat forwards or back
Lift and hold the handle 1 to unlock the seat.
Release the handle once the seat is in the correct position and ensure that the seat
is locked.
To raise or lower the seat base
Move the lever 3 as many times as necessary upwards or downwards until the required position is reached.
To tilt the seatback
Raise the handle 2 or 4 and tilt the seatback to the desired position.
Release the handle at the desired position and make sure that it is locked.
WARNING
After making adjustments, make sure that the seatbacks are correctly locked in place.
WARNING
For safety reasons, carry out any adjustments while the vehicle is stationary.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness
of the seat belts is not reduced.
Nothing should be placed on the floor (area in front of the driver) as these objects
may slide under the pedals during sudden braking manoeuvres, thus obstructing their
use.
Central armrest 5
(depending on the vehicle)
To adjust the position of the armrest, slide it forwards or backwards until it reaches
the stop.
Heated seats
Ignition on:
- pressing the switch 6 on the required seat for the first time activates the heating system on high. Both of the built-in warning lights on the switch light up;
- pressing the switch for the second time changes the heating to low. One integrated warning light is illuminated;
- pressing for the third time turns the heating off.
Operating faults
When an operating fault is detected, the indicator lights of the switch 6 for the seat concerned go out after approximately five seconds.
Consult an approved dealer.