Renault Master 4
warning
To avoid all risk of injury, ensure that nobody is in the proximity of the moving parts.
When lowering/raising the flatbed, ensure that nothing interferes with the moving parts.
Tilting the flatbed
With the vehicle stationary, engine running, apply the handbrake.
Move the battery isolation lever 1 to position B (ON).
Remove the remote control 2 from its housing.
tip
Do not drive with the flatbed raised.
To lift the flatbed
Press button 3.
To lower the flatbed
Press button 4.
Remote control fuse
If the remote control malfunctions, check and change the 5 (5 A) fuse if necessary.
tip
Due to the limited accessibility of the fuse, we advise you to have this fuse replaced by an approved dealer.
warning
Precautions to take during flatbed raising or lowering operations
When raising or lowering the flatbed, the gear lever must be in neutral and the handbrake applied.
Raise the flatbed only on flat, stable and horizontal ground.
Make sure the flatbed is relieved of its load before putting it on a stay.
Never position yourself under the lifted flatbed without using the stay.
warning
When the flatbed lowering manoeuvre is complete, return the battery isolation lever 1 to position A (OFF).
Do not use the control unit in the flatbed movement area.
To avoid all risk of injury, ensure that nobody is in the proximity of the moving parts.