Safe passenger exit

<?xml version="1.0" standalone="yes"?>

Description

10007_DHN_117_1_image.jpeg

This function is an additional driving aid for the safety of the occupants of the vehicle.

Chapter

Wiper blades: replacement

<?xml version="1.0" standalone="yes"?>

Replacing the windscreen wiper blades 2

To replace the wipers, first put them in the service position B.

Engine running or ignition on:

Chapter

Hands-free parking

<?xml version="1.0" standalone="yes"?>

Introduction

As indicated by the arrows 1, the ultrasonic detectors installed in the vehicle bumpers help to find accessible parking spaces and assist the parking manoeuvre.

Chapter

Exterior lighting: replacing bulbs

<?xml version="1.0" standalone="yes"?>
tip

To replace LED bulbs, consult an approved dealer.

Before replacing the bulb.

Identify its initial positioning in its housing.

When changing the bulb.

Chapter

Parking distance control

<?xml version="1.0" standalone="yes"?>

Operating principle

Ultrasonic sensors, indicated by arrows 1, are fitted in the bumpers to detect obstacles near the vehicle.

The function alerts the driver via audible signals and a display representing the area where the obstacle was detected.

Chapter

Secondary 12 V battery: breakdown recovery

<?xml version="1.0" standalone="yes"?>

Starting the vehicle using the battery from another vehicle

If the secondary "12 V" battery charge level is too low, it is possible to use the battery of another vehicle to re-activate and operate the hybrid system Starting, stopping the engine.

As the battery cannot be directly accessed, it is necessary to use the remote terminals located in the engine compartment.

Chapter