Battery: breakdown recovery

<?xml version="1.0" standalone="yes"?>

To avoid all risk of sparks:

  • Ensure that the "energy consumers" (ceiling lights, etc.) are switched off before disconnecting or reconnecting a battery;
  • when charging, switch off the charger before connecting or disconnecting the battery;
  • do not place any metal objects on the battery as this may create a short circuit across the terminals;
  • wait for at least five minutes after switching off the engine before disconnecting the battery;
  • make sure that you reconnect the battery terminals

Chapter

Towing: breakdown

<?xml version="1.0" standalone="yes"?>

Before towing, set the gearbox to the neutral position (Nposition for vehicles equipped with an automatic gearbox) then, for E-Tech Full Hybrid versions, wait for around a minute. Unlock the steering column then release the parking brake.

Steering column unlocking

Chapter

Emergency Stop Assist

<?xml version="1.0" standalone="yes"?>

Introduction

The Emergency Stop Assist function is a driving aid that automatically acts on the steering and braking of your vehicle when it detects situations where you no longer have your hands on the wheel or are no longer watching the road.

Depending on the vehicle, the system is associated with the following driving aids:

Chapter

Active driver assist

<?xml version="1.0" standalone="yes"?>

Introduction

The "Active driver assist" is a driving aid system for use outside built-up areas, on wide roads with visible lines.

This system consists of the "Adaptive cruise control" functionAdaptive cruise control and the "Lane Centring" function.

Chapter

Wheel trims, wheel trim – wheel

<?xml version="1.0" standalone="yes"?>

Remove it using the hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the valve 2.

Chapter

Changing a wheel

<?xml version="1.0" standalone="yes"?>

warning

Switch on the hazard warning lights.

Keep the vehicle away from traffic and on a level surface where it will not slip.

Chapter