Exterior lighting: replacing bulbs

<?xml version="1.0" standalone="yes"?>

Front headlights

LED main beam/dipped beam/direction indicator lights 1

Consult an approved Dealer.

Chapter

Battery: breakdown recovery

<?xml version="1.0" standalone="yes"?>

To avoid all risk of sparks:

  • Ensure that the "energy consumers" (ceiling lights, etc.) are switched off before disconnecting or reconnecting a battery;
  • when charging, switch off the charger before connecting or disconnecting the battery;
  • do not place any metal objects on the battery as this may create a short circuit across the terminals;
  • wait for at least five minutes after switching off the engine before disconnecting the battery;
  • make sure that you reconnect the battery termina

Chapter

Towing: breakdown

<?xml version="1.0" standalone="yes"?>

Breakdown recovery

Before towing, set the lever to neutral (N position on vehicles equipped with an automatic gearbox) then wait approximately one minute (on the E-tech full hybrid version), unlock the steering column then release the parking brake.

Chapter

Wheel trims, wheel trim – wheel

<?xml version="1.0" standalone="yes"?>

(depending on the vehicle)

Remove it using the hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the valve 2.

To refit it, align it with the valve 2.

Chapter

Changing a wheel

<?xml version="1.0" standalone="yes"?>

warning

Switch on the hazard warning lights.

Keep the vehicle away from traffic and on a level surface where it will not slip.

Chapter

Puncture, emergency spare wheel

<?xml version="1.0" standalone="yes"?>

In case of puncture

Depending on the vehicle, the following may be available:

Vehicle fitted with a tyre pressure loss warning system

Chapter

Tools

<?xml version="1.0" standalone="yes"?>

Chapter