Renault Express

to

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

101778 km

a) Total mileage and trip mileage recorder.

112.4 km

Average

b) Trip settings:

Average fuel consumption.

The value is displayed after having travelled at least 400 metres since the last reset.

5.8 L/100

Current

Current fuel consumption.

Value displayed after reaching a speed of 12 mph (20 km/h), depending on the vehicle.

7.4 L/100

Examples of selections

Interpreting the display selected

Range

Estimated range with remaining fuel.

The value is displayed after driving 400 metres.

541 km

Distance

Distance travelled since last reset.

522 km

Average

Average speed since last reset.

The value is displayed after driving 400 metres.

123.4 km/h

56 mph (90 km/h)

c) Current speed (depending on the vehicle).

Examples of selections

Interpreting the display selected

On-board computer with distance-before-service message

Service distance

Service in

30 000 Km / 12months

d) Distance before service.

With the ignition on, the engine not running and the display set to "Range before service", press and hold button 1 or 2 for approximately five seconds to display the range before service (distance or time to the next service). When the distance or time value approaches its limit, there are several possible scenarios:

  • distance remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
  • range equal to 0 miles (0 km) or date of service reached: the message "Service required" is displayed accompanied by the warning light 1_ALL_036_1_pictogramme.png .

The vehicle requires a service as soon as possible.

Service due in

300 Km / 24days

Service vehicle

Reset: to reset the distance before the next service, press and hold the button 1 or 2 for approximately 10 seconds until the display shows the mileage before service permanently.

Note: if a service is performed without changing the engine oil, only the distance before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

On-board computer with distance-before-service message

Service distance

Service in

30 000 Km / 12months

e) Oil change interval

With the ignition on, the engine not running and the display showing "Range before service", press and hold button 1 or 2 for approximately five seconds to display the range before service, then press button 1 to view the range before the next oil change (distance or time remaining before the next service). When the distance or time value approaches its limit, there are several possible scenarios:

  • distance remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
  • range equal to0 miles (0 km) or date of oil change reached: the message "Service required" is displayed accompanied by the warning light 1_ALL_036_1_pictogramme.png .

The vehicle requires an oil change as soon as possible.

Service due in

300 Km / 24days

Service vehicle

Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

Reset: to reset the mileage before the next service, press and hold button 1 or 2 for approximately 10 seconds until the display shows the mileage before oil change permanently.

Note: if a service is performed without changing the engine oil, only the distance before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

Tyre pressure init. long press

f) reset the tyre pressure.

Tyre pressure monitoring system.

Vehicle Systems OK

g) Computer log.

Successive display:

  • information messages (ESC deactivated/activated, Stop and Start activated, etc.);
  • operating fault messages (check injection system, check airbag, etc.).

Top Up AdBlue before 2400 km

h) Estimated range with remaining reagent.

Reagent tank.

i) Engine coolant temperature.

Interpreting the display selected

j) Time and exterior temperature.

Settings (Press and hold)

k) General settings.

Press button 1 or 2 for approximately five seconds to select the display language.

Settings Only When Stationary

Indicates that to access the "General settings" menu, you must stop the vehicle.