Journey settings | user manual

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections	Interpreting the display selected
63,242 miles (101,778 km) 70 miles (112.4 km)	a) Total mileage and trip mileage recorder.
Average 1.28 gal (5.8 l)/100 or 12.8 kWh/100	b) Trip settings: Average consumption: the value is displayed after having travelled at least 400 metres since the last reset.
Current 1.63 gal (7.4 l)/100 or + 13.4k kWh	Current fuel consumption.
Range 336 miles (541 km)	Estimated range with remaining fuel. The value is displayed after driving 400 metres.
Distance 324 miles (522 km)	Distance travelled since last reset.
Average 76.7 mph (123.4 km/h)	Average speed since last reset. The value is displayed after driving 400 metres.
56 mph (90 km/h)	c) Current speed (depending on the vehicle).
	d) Engine coolant temperature.
16° 12 : 00	e) Set the time.

Examples of selections		Interpreting the display selected
On-board computer with distance-before-service message
Service distance	Service in 24,855 miles (40,000 km)/24 months	f) Mileage before service. With the ignition on, the engine not running and the display set to "Mileage before service", press button 2 or 3 for approximately five seconds to display the mileage before service (distance or time to next service). When the distance or time value approaches its limit, there are several possible scenarios: mileage remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time); if the range is 0 miles (0 km) or if the service date is reached: the "Service required" message is displayed accompanied by the warning light. The vehicle requires a service as soon as possible.
Service due in 186 miles (300 km)/24 days
Service required
Service distance	Oil change in 24,855 miles (40,000 km)/24 months	g) Range before service With the ignition on, the engine not running and the display showing "Service interval", press button 2 or 3 for approximately five seconds to display the service interval, then press the button 3 to view the oil change interval (distance or time to the next service). When the distance or time value approaches its limit, there are several possible scenarios: mileage remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time); interval equal to 0 miles (0 km) or oil change date reached: the "Service required" message is displayed accompanied by the warning light. The vehicle requires an oil change as soon as possible.
Service due in 186 miles (300 km)/24 days
Service required
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled. Reset: to reset the mileage before the next service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage before oil change permanently. Note: if a service is performed without changing the engine oil, only the service interval should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections	Interpreting the display selected
Tyre pressure init. long press	h) Reset the tyre pressures Tyre pressure loss warning.
Settings (Press and hold)	i) general settings. Press button 2 or 3 for approximately five seconds to select the display language.
Vehicle Systems OK	j) Trip log. Successive display: information messages (ESC deactivated/activated, Stop and Start activated, etc.); operating fault messages (check the injection system, Airbag etc.).
Top Up AdBlue before 2400 km	k) Estimated range with remaining reagentReagent tank.