Renault Boreal
Installation visual for the five-door, five-seat version
Seat not suitable for fitting child seats.
Child seat attached using the mounting ISOFIX
Seat which allows an ISOFIX child seat to be fitted.
The rear side seats are equipped with an anchoring point enabling a universal
warning
Check that your child is always strapped in and that the belt or safety harness used is correctly set and adjusted Seat belts.
If necessary, adjust the seat position accordingly.
warning
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.
warning
It is prohibited to fit a child seat in the adjacent available seat when the seatback is folded down onto the other seats Rear seats.
Installation table
The table below summarises the information shown on the installation diagram in order to ensure the regulations in force are respected.
Type of child seat | Weight of the child | Size of seat [fixture] | Front passenger seat | Rear seats | ||
|---|---|---|---|---|---|---|
With airbagactivated | Without airbag or airbag deactivated | Side seats | Centre seat | |||
Carrycot fitted across the vehicle Approved for group 0 | < 10 kg | L1 [F], L2 [G] | X | X | X | X |
Rear-facing shell seat Approved for group 0 or 0+ | < 13 kg | R1 [E] | X | X | IL (1) | X |
Rear-facing seat Approved for group 0+ or 1 | < to 13 kg and 9 to 18 kg | R2 [D], R2X [D] | X | X | IL (1) | X |
R3 [C] | X | X | IL (1) | X | ||
Forward-facing seat Approved for group 1 | 9 kg to 18 kg | F3 [A], F2 [B], F2X [B1] | X | X | IUF-IL(1) (2) | X |
Booster seat Approved for group 2 or 3 | 15 kg to 25 kg and 22 kg to 36 kg | B2 | X | X | IUF-IL(1) (2) | X |
| B3 | X | X | X | X | ||
Seati-Size | Rear-facing seat | X | X | i-U(1) | X | |
Forward-facing seat | X | X | i-UF(1) (2) | X | ||
Booster seat | X | X | i-UF(1) (2) | X | ||
X = Seat not suitable for fitting child seats of this type.
IUF = Seat enabling a child seat with "Universal" or "Vehicle-specific" approval to be fitted using ISOFIX anchoring points (on equipped vehicles): check that it can be fitted.
IL = Seat enabling a child seat with "Semi-universal" or "Vehicle-specific" approval to be fitted using ISOFIX anchoring points (on equipped vehicles): check that it can be fitted.
i-U = Suitable only for "Universal" front-facing and rear-facing i-Size restraint systems: check that it can be fitted.
i-UF = Suitable only for "Universal" front-facing i-Size restraint systems.
(1) If necessary, position the vehicle seat as far back as possible. Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.
(2) Always retract the headrest of the rear seat on which the child seat is positioned. This action must be performed before fitting the child seat Rear headrests. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.
The size of the ISOFIX child seat is indicated by a letter:
- F3 [A], F2 [B],F2X[B1]: for forward-facing seats in Group 1 (9 to 18 kg);
- R2 [D], R2X [D], R3 [C]: rear-facing seats or shell seats in Group 0+ (less than 13 kg) or Group 1 (9 to 18 kg);
- R1 [E] rear-facing shell seats in Group 0 (less than 10 kg) or 0+ (less than 13 kg);
- L1 [F], L2 [G]: carrycots in group 0 (less than 10 kg);
- B2, B3: booster seats in Groupe 2 and 3 (15 to 25 kg and 22 to 36 kg).