Depending on the vehicle, this includes the following functions:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (related to the 1_ALL_040_1_pictogramme.png warning light).

Vehicle fitted with trip computer A

Scroll through the following information by repeatedly pressing button 2 or 3 (the display depends on the vehicle equipment and country):

a)
total mileage and trip mileage recorder;
b)
journey settings:
  • average fuel consumption;
  • current fuel consumption;
  • Estimated range with remaining fuel;
  • distance travelled;
  • average speed;
c)
current speed;
d)
service and oil change interval;
e)
Reset the tyre pressure
f)
trip log, operating faults and information message readout;
g)
engine coolant temperature;
h)
clock and exterior temperature;
i)
general adjustment.

Trip mileage resetting

With the "Trip mileage recorder" selected on the display, press button 2 or 3 until the mileage recorder resets to zero.

Resetting the journey parameters (reset button)

With one of the journey parameters selected on the display, press button 2 or 3 until the display resets to zero. With one of the journey parameters selected on the display, press button 2 or 3 until the display resets to zero.

Resetting the trip mileage recorder and journey parameters (reset button)

(depending on the vehicle)

With one of the trip settings selected as the display, press and hold switch 4 "OK" until the display resets to zero.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.

The average fuel consumption may decrease when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Vehicle fitted with trip computer B

The functions are distributed in zones 5 and 6.

Press switch 1 to navigate between zones and select the functions by pressing switches 2 or 3 (the display depends on the vehicle equipment and country):

a)
Trip log, operating faults and information message readout;
b)
journey settings:
  • average energy consumption;
  • current energy consumption;
  • estimated range with remaining energy;
  • mileage;
  • average speed;
c)
trip mileage recorder and average speed;
d)
reset the tyre pressure;
e)
setting the time;
f)
service interval.

Resetting the trip mileage recorder and journey parameters (reset button)

(depending on the vehicle)

With one of the trip settings selected as the display, press and hold switch 4 "OK" until the display resets to zero.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Interpreting some of the values displayed after resetting

The greater the distance travelled since the last reset, the greater the stability and reliability of the average energy consumption, range and speed values.

For the first few miles after pressing the reset key you will notice that the range increases as you travel.

This range takes into account the average fuel consumption since the last time the reset button was pressed.

However, the average energy consumption may fall when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.

Resetting the estimated range

After the traction battery has been fully recharged, you can select two types of resetting: manual or automatic.

Manual reset

Select the trip setting to reset, then press and hold the switch 4 to reset the range.

Automatic reset

The range is automatically reset when the traction battery is fully charged. The calculated value corresponds to an average use, taking into account the exterior temperature. If a particularly economical driving pattern is identified, the calculation is corrected and the range is increased.