Trip computer A or B

11021_HJBPH2_002_1_image.jpeg

Depending on the vehicle, this includes the following functions:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (related to the 1_ALL_040_1_pictogramme.png warning light);
  • vehicle settings customisation menu Vehicle settings personalisation menu.

All of these functions are detailed in this user manual.

Vehicle fitted with instrument panel A

11021_HJBPH2_008_1_image.jpeg

The functions are displayed in zone 5

Select the functions by repeatedly pressing switch 2 or 3.

Vehicle fitted with instrument panel B

The functions are displayed in zones 5.

Select the functions by repeatedly pressing switch 2 or 3.

Selections

(the display depends on the vehicle equipment and country)

f) Trip log, operating fault and information message readout;

b) Trip settings:

  • average fuel consumption;
  • current fuel consumption;
  • estimated mileage with remaining fuel;
  • mileage;
  • average speed;
  • average LPG consumption;
  • estimated range with remaining LPG fuel;
  • LPG distance travelled;

c) trip mileage recorder and average speed;

d) reset the tyre pressures;

e) set the time;

f) mileage before service:

  • distance before service;
  • distance before oil change.

Resetting the trip mileage recorder and journey parameters (reset button)

With one of the trip settings selected as the display, press and hold switch 4 "OK " until the display resets to zero.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. Therefore, the average fuel consumption may decrease when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.