Trip computer A or B

Depending on the vehicle, this includes the following functions:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (related to the 1_ALL_040_1_pictogramme.png warning light);
  • vehicle settings customisation menu Vehicle settings personalisation menu.

Vehicle fitted with trip computer A

The functions are distributed in zones 5, 6, 7 and 8. The location of the zones differs depending on the style selected.

Press the switch 1 to navigate between zones and select the functions by repeatedly pressing the 2 or 3 switches, then confirm if necessary by pressing the switch 4 "OK ".

Vehicle fitted with trip computer B

The functions are distributed in zones 9 and 10.

Press the switch 1 to navigate between zones and select the functions by repeatedly pressing the 2 or 3 switches, then confirm if necessary by pressing the switch 4 "OK ".

Selections

(the display depends on the vehicle equipment and country)

f) Trip log, operating fault and information message readout;

b) current fuel consumption and average fuel consumption;

c) trip mileage recorder and average speed;

d) reset the tyre pressures;

e) set the time;

f) mileage before service:

  • Mileage before service;
  • Mileage before oil change.

g) estimated range with remaining reagent.

Resetting the trip mileage recorder and journey parameters (reset button)

With one of the trip parameters selected as the display, press and hold the 4 "OK " switch until the display resets to zero.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. However, average consumption can decrease when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.