The " My Safety " function can be used to deactivate or activate a set of driving assistance functions simultaneously.

Depending on the vehicle, you can configure the "My Safety" function from the multimedia screen or from the instrument panel by selecting the driving aid functions to be switched off as a group.

Operation

“ALL ON” mode

Depending on the vehicle version, the mode features the following driving assistance functions:

When the "ALL ON" mode is activated: the indicator light on button 1 comes on and the message "My Safety All ON selected" is displayed on the instrument panel to confirm this. The driving assistance available in the mode is activated.

“Perso” mode

This mode can be used to disable or re-enable driving functions available in the "ALL ON" mode configured via the "My Safety Perso" settings.

When the ignition is on, press button 1 twice in a row to activate the "Perso" mode.

The first time you press it, the message "Press again for My Safety Perso" is displayed on the instrument panel. On the second press, the button 1 indicator light goes out. "Perso" mode is enabled. The "My Safety Perso selected" message is displayed on the instrument panel.

To return to "ALL ON" mode, press button 1 once. The indicator light on button 1 goes on;

tip

Depending on the vehicle and according to the time elapsed since the last time the engine was switched off, "ALL ON" mode is re-enabled:

  • when the vehicle is unlocked;

or

  • when a door is opened;

or

  • when the engine is started again.

Configuration of My Safety Perso

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

tip

The "My Safety Perso" settings saved for "Perso" mode are stored each time the engine is or when the doors are locked.

Multimedia Display Setup 2

Refer to the multimedia instructions for information on how to access the settings.