Using the information from the camera 1 and radar 2, this function informs the driver of the time interval between their vehicle and the vehicle in front, in order to maintain a safe stopping distance between the two vehicles.

The function is activated when the vehicle speed is between approximately 19 mph (30 km/h) and 93 mph (150 km/h) or 99 mph (160 km/h), depending on the vehicle.

Location of camera 1

Make sure the windscreen is not obscured (by dirt, mud, snow, condensation etc.).

warning

This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle.

Location of the radar 2

Check that the radar area is not obstructed (by dirt. mud, snow, a poorly fitted/installed front number plate, etc.), impacted, modified (including paintwork, etc.) or concealed by any accessory fitted to the front of the vehicle (on the grille, logo, etc.)

Enabling/disabling the system from the multimedia screen 3

In the "VEHICLE" world on the multimedia screen 3, press the menu "Driving assistance".

Turn the "Following distance" function on or off.

tip

Each time the vehicle is started, the function will resume the mode saved the last time the engine was switched off.

Operation

With the function activated, the warning light 4 is displayed on the instrument panel to inform the driver of the distance between their vehicle and the vehicle in front.

  • A (grey): function not in operation;
  • A (green): no vehicle detected;
  • B (green): the time interval is equal to or greater than approximately two seconds (distance between both vehicles adapted to their speed);
  • C (yellow): the time interval is between approximately one and two seconds (insufficient distance between vehicles);
  • D (red): the time interval is equal to or less than approximately one second (very insufficient distance between vehicles).

If the time interval between the two vehicles is less than approximately 0.5 seconds, notification 4 on display D will remain lit in red on the instrument panel.

Under certain conditions, the time interval may not be displayed:

  • when on a bend;
  • when changing lanes;
  • if the vehicle in front is sufficiently far away or out of range of the camera.

Warnings

warning

The measurement is displayed for information: the system does not carry out any action on the vehicle.

This function is not designed for use in urban conditions or for a dynamic driving style (sudden cornering, acceleration, braking, etc.), but rather for stable driving conditions.

The function does not interact with the braking system.

the camera should be kept clean and free of any modifications in order to ensure the proper operation of the system.

Any work in the area where the camera is located (repairs, replacements, windscreen modifications etc.) must be carried out by a qualified professional.

warning

This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle.

System servicing/repairs

  • In the event of an impact, the camera alignment may be changed and its operation may consequently be affected. Deactivate the function and consult an authorised dealer.
  • Any work in the area where the camera is located (repairs, replacements, windscreen modifications etc.) must be carried out by a qualified professional.

Only an authorised dealer is qualified to service the system.

In the event of system disturbance

  • windscreen obscured (by dirt, ice, snow, condensation etc.);
  • a complex environment (metal bridge, tunnel, etc.);
  • poor weather conditions (snow, hail, black ice, etc.);
  • poor visibility (night, fog, etc.);
  • poor contrast between the vehicle preceding it and the surrounding area (e.g. white vehicle in a snowy area, etc.);
  • being dazzled (glaring sun, lights of vehicles travelling in the opposite direction; etc.);
  • the road is narrow, winding and undulating (tight bends etc.)

Risk of erroneous false alarms.