Pull the lever 1 to open it.

warning

The engine must be switched off (not placed in neutral) before any operations are carried out in the engine compartment.

You must switch off the ignition, Starting, stopping the engine.

warning

The engine may be hot when working in close proximity. Also, the engine cooling fan could be activated at any moment. The symbol 2_ALL_290_1_pictogramme.png in the engine compartment reminds you of this.

Risk of injury.

warning

When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.

Risk of injury.

warning

Deactivate the remote engine start-up or the engine start-up function before opening the bonnet and while it is open.

Risk of burns or serious injury.

warning

Do not lean on the bonnet as there is a risk that it could accidentally close.

Unlocking the bonnet catch

To unlock, lift the bonnet slightly and release the catch 2 by pushing the lever 4 towards the left.

Opening the bonnet

Raise the bonnet and guide it – the bonnet is held up by two struts 3.

Closing the bonnet

Check that nothing has been left in the engine compartment.

Hold the middle of the bonnet and guide it down to one foot (30 cm) above the closed position, then release. It will latch automatically under its own weight.

warning

Ensure that the bonnet is properly locked. Check that nothing is preventing the catch from locking (gravel, cloth, etc.).

warning

After any procedure in the engine compartment, make sure that you do not forget anything (cloth, tools, etc.).

Otherwise, this may lead to engine damage or cause a fire.

warning

In the event of even a slight impact involving the radiator grille or bonnet, have the bonnet lock checked by an approved dealer as soon as possible.