Renault Trafic
Attachment by seat belt
2-seater van version
Fitting diagram
-
- Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
-
- Seat not suitable for fitting child seats.
Child seat attached using the belt
-
- Seat equipped for attaching a "universal" approved seat using a seatbelt.
B2: seat enabling a child seat with "B2" approval to be attached by seat belt.
WARNING
Check that your child is always strapped in and that the belt or safety harness used
is correctly set and adjusted FRONT SEAT BELTS.
If necessary, adjust the seat position accordingly.
WARNING
Using a child safety system which is not approved for this vehicle will not properly
protect the baby or child. They risk serious or even fatal injury.
WARNING
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear facing child seat on the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
2-seater van version: installation table
The table below summarises the information already shown on the previous diagram in
order to ensure the regulations in force are respected.
2-seater van versions | ||
Type of child seat | Weight of the child | Front passenger seat(s) with single seat |
Shell seat/rear-facing seat Groups 0, 0+ and 1 | < to 13 kg and 9 to 18 kg | U (2)
|
Forward-facing seat Group 1 | 9 to 18 kg | U (1)
|
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | U / B2 (1)
|
U = Seat allowing a child seat with "Universal" approval to be attached by seat belt:
check that it can be fitted.
B2 = Seat enabling a child seat with "B2" approval to be attached by seat belt: check
that it can be fitted.
(1) To fit a forward-facing child seat, position the back of the child seat so that it
is in contact with the vehicle seatback. Raise the headrest. Raise the seat to the
maximum and position it as far back as possible, tilting the seatback slightly (approximately
25°).
WARNING
(2) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
3-seater van version
Fitting diagram
-
- Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
-
- Seat not suitable for fitting child seats.
Child seat attached using the belt
-
- Seat equipped for attaching a "universal" approved seat using a seatbelt.
B2: seat enabling a child seat with "B2" approval to be attached by seat belt.
WARNING
Check that your child is always strapped in and that the belt or safety harness used
is correctly set and adjusted FRONT SEAT BELTS.
If necessary, adjust the seat position accordingly.
WARNING
Using a child safety system which is not approved for this vehicle will not properly
protect the baby or child. They risk serious or even fatal injury.
WARNING
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear facing child seat on the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
3-seater van version: installation table
The table below summarises the information already shown on the previous diagram in
order to ensure the regulations in force are respected.
3-seater van versions | |||
Type of child seat | Weight of the child | Front passenger seat(s) with 2-seat bench seat | |
Centre seat | Side seat | ||
Shell seat/rear-facing seat Groups 0, 0+ and 1 | < to 13 kg and 9 to 18 kg | X | U (2)
|
Forward-facing seat Group 1 | 9 to 18 kg | X | U (1)
|
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | X | U / B2 (1)
|
X = Seat which does not allow a child seat of this type to be fitted.
U = Seat allowing a child seat with "Universal" approval to be attached by seat belt:
check that it can be fitted.
B2 = Seat enabling a child seat with "B2" approval to be attached by seat belt: check
that it can be fitted.
(1) To fit a forward-facing child seat, position the back of the child seat so that it
is in contact with the vehicle seatback. Raise the headrest. Raise the seat to the
maximum and position it as far back as possible, tilting the seatback slightly (approximately
25°).
WARNING
(2) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
5-seater Combi
Fitting diagram
-
- Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
Child seat attached using the belt
-
- Seat equipped for attaching a "universal" approved seat using a seatbelt.
-
- Seat not suitable for fitting child seats.
B2: seat enabling a child seat with "B2" approval to be attached by seat belt.
B3: seat enabling a child seat with "B3" approval to be attached by seat belt.
WARNING
Check that your child is always strapped in and that the belt or safety harness used
is correctly set and adjusted FRONT SEAT BELTS.
If necessary, adjust the seat position accordingly.
WARNING
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear facing child seat on the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
WARNING
Using a child safety system which is not approved for this vehicle will not properly
protect the baby or child. They risk serious or even fatal injury.
5-seater Combi version: installation table
The table below summarises the information already shown on the previous diagram in
order to ensure the regulations in force are respected.
5-seater Combi version | ||||
Type of child seat | Weight of the child | Front passenger seat | Rear side seat | Rear centre seat |
Carrycot fitted across the vehicle Group 0 | < 10 kg | X | U (3)
| U (3)
|
Rear-facing shell seat Groups 0 and 0+ | < 13 kg | U (1) (2)
| U (4)
| U (4)
|
Rear-facing seat Groups 0+ and 1 | < to 13 kg and 9 to 18 kg | U (1) (2)
| U (4)
| U (4)
|
Forward-facing seat Group 1 | 9 to 18 kg | U (2)
| U (5)
| U (5)
|
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | U/B2 (2)
| U/B2 / B3 (5)
| U/B2 (5)
|
X = Seat not suitable for fitting this type of child seat.
U = Seat allowing a child seat with "Universal" approval to be attached by seat belt:
check that it can be fitted.
B2 = Seat allowing a child seat with "B2" approval to be attached by seat belt: check that it can be fitted.
B3 = Seat allowing a child seat with "B3" approval to be attached by seat belt: check that it can be fitted.
WARNING
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
(2) Raise the seat to the maximum and position it as far back as possible, tilting the
seatback slightly (approximately 25°).
(3) A carrycot can be installed across the vehicle and will take up at least two seats.
Position the child with his or her feet nearest the door.
(4) In order to install a rear-facing child seat, move the front seat as far forward
as possible, then move the front seat back as far as it will go, without allowing
it to come into contact with the child seat.
(5) To fit a forward-facing child seat, position the back of the child seat in contact
with the vehicle seatback. In all situations, remove the rear headrest of the seat
on which the child seat is positioned. This action must be performed before fitting
the child seat REAR HEADRESTS. Do not push the seat in front of the child more than halfway back on its runners
and do not recline the seatback more than 25°.
6-seater Combi
Fitting diagram
-
- Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
Child seat attached using the belt
-
- Seat equipped for attaching a "universal" approved seat using a seatbelt.
-
- Seat not suitable for fitting child seats.
B2: seat which allows a child seat with "B2" approval to be attached by seat belt.
B3: seat allowing a child seat with "B3" approval to be attached by seat belt.
Tip
When a child seat is installed in the front passenger seat, it is recommended not
to use the middle seat and to leave it unoccupied.
WARNING
Check that your child is always strapped in and that the belt or safety harness used
is correctly set and adjusted FRONT SEAT BELTS.
If necessary, adjust the seat position accordingly.
WARNING
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear facing child seat on the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
WARNING
Using a child safety system which is not approved for this vehicle will not properly
protect the baby or child. They risk serious or even fatal injury.
6-seater Combi version: installation table
The table below summarises the information shown on the following diagram in order
to ensure the regulations in force are respected.
6-seater Combi version | |||||
Type of child seat | Weight of the child | Front seat | Rear seat | ||
Central passenger | Side passenger | Side | Central | ||
Carrycot fitted across the vehicle Group 0 | < 10 kg | X | X | U (2)
| U (2)
|
Rear-facing shell seat Groups 0 and 0+ | < 13 kg | X | U (1)
| U (3)
| U (3)
|
Rear-facing seat Groups 0+ and 1 | < to 13 kg and 9 to 18 kg | X | U (1)
| U (3)
| U (3)
|
Forward-facing seat Group 1 | 9 to 18 kg | X | U | U (4)
| U (4)
|
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | X | U/B2 | U/B2 / B3 (4)
| U (4)
|
X = Seat not suitable for fitting this type of child seat.
U = Seat allowing a child seat with "Universal" approval to be attached by seat belt:
check that it can be fitted.
B2 = Seat allowing a child seat with "B2" approval to be attached by seat belt: check that it can be fitted.
B3 = Seat allowing a child seat with "B3" approval to be attached by seat belt: check that it can be fitted.
WARNING
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
(2) A carrycot can be installed across the vehicle and will take up at least two seats.
Position the child with his or her feet nearest the door.
(3) In order to install a rear-facing child seat, move the front seat as far forward
as possible, then move the front seat back as far as it will go, without allowing
it to come into contact with the child seat.
(4) To fit a forward-facing child seat, position the back of the child seat in contact
with the vehicle seatback. In all situations, remove the rear headrest of the seat
on which the child seat is positioned. This action must be performed before fitting
the child seat REAR HEADRESTS. Do not push the seat in front of the child more than halfway back on its runners
and do not recline the seatback more than 25°.
Combi/8-seater bus
Fitting diagram
-
- Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
Child seat attached using the belt
-
- Seat equipped for attaching a "universal" approved seat using a seatbelt.
-
- Seat not suitable for fitting child seats.
B2: seat which allows a child seat with "B2" approval to be attached by seat belt.
B3: seat allowing a child seat with "B3" approval to be attached by seat belt.
WARNING
Check that your child is always strapped in and that the belt or safety harness used
is correctly set and adjusted FRONT SEAT BELTS.
If necessary, adjust the seat position accordingly.
WARNING
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear facing child seat on the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
WARNING
Using a child safety system which is not approved for this vehicle will not properly
protect the baby or child. They risk serious or even fatal injury.
8-seater Combi/Bus version: installation table
The table below summarises the information already shown on the previous diagram in
order to ensure the regulations in force are respected.
8-seater Bus/Combi version | ||||||
Type of child seat | Weight of the child | Front passenger seat | Rear seat | |||
2nd row side seats | 2nd row centre seat | 3rd row side seats | 3rd row centre seat | |||
Carrycot fitted across the vehicle Group 0 | < 10 kg | X | U (3)
| U (3)
| U (3)
| U (3)
|
Rear-facing shell seat Groups 0 and 0+ | < 13 kg | U (1) (2)
| U (4)
| U (4)
| U (4)
| U (4)
|
Rear-facing seat Groups 0+ and 1 | < to 13 kg and 9 to 18 kg | U (1) (2)
| U (4)
| U (4)
| U (4)
| U (4)
|
Forward-facing seat Group 1 | 9 to 18 kg | U (2)
| U (5)
| U (5)
| U (5)
| U (5)
|
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | U / B2 (2)
| U/B2 / B3 (5)
| U/B2 / B3 (5)
| U/B2 / B3 (5)
| U/B2 (5)
|
X = Seat not suitable for fitting this type of child seat.
U = Seat allowing a child seat with "Universal" approval to be attached by seat belt:
check that it can be fitted.
B2 = Seat allowing a child seat with "B2" approval to be attached by seat belt: check that it can be fitted.
B3 = Seat allowing a child seat with "B3" approval to be attached by seat belt: check that it can be fitted.
WARNING
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
(2) Raise the seat to the maximum and position it as far back as possible, tilting the
seatback slightly (approximately 25°).
(3) A carrycot can be installed across the vehicle and will take up at least two seats.
Position the child with his or her feet nearest the door.
(4) In order to install a rear-facing child seat, move the front seat as far forward
as possible, then move the front seat back as far as it will go, without allowing
it to come into contact with the child seat.
(5) To fit a forward-facing child seat, position the back of the child seat in contact
with the vehicle seatback. In all situations, remove the rear headrest of the seat
on which the child seat is positioned. This action must be performed before fitting
the child seat REAR HEADRESTS. Do not push the seat in front of the child more than halfway back on its runners
and do not recline the seatback more than 25°.
Combi/9-seater bus
Fitting diagram
-
- Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
Child seat attached using the belt
-
- Seat equipped for attaching a "universal" approved seat using a seatbelt.
-
- Seat not suitable for fitting child seats.
B2: seat which allows a child seat with "B2" approval to be attached by seat belt.
B3: seat enabling a child seat with "B3" approval to be attached by seat belt.
Tip
When a child seat is installed in the front passenger seat, it is recommended not
to use the middle seat and to leave it unoccupied.
WARNING
Check that your child is always strapped in and that the belt or safety harness used
is correctly set and adjusted FRONT SEAT BELTS.
If necessary, adjust the seat position accordingly.
WARNING
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear facing child seat on the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
WARNING
Using a child safety system which is not approved for this vehicle will not properly
protect the baby or child. They risk serious or even fatal injury.
9-seater Combi/Bus version: installation table
The table below summarises the information shown on the following diagram in order
to ensure the regulations in force are respected.
9-seater Bus/Combi version | |||||||
Type of child seat | Weight of the child | Front seat | Rear seat | ||||
Central passenger | Side passenger | 2nd row side seats | 2nd row centre seat | 3rd row side seats | 3rd row centre seat | ||
Carrycot fitted across the vehicle Group 0 | < 10 kg | X | X | U (2)
| U (2)
| U (2)
| U (3)
|
Rear-facing shell seat Groups 0 and 0+ | < 13 kg | X | U (1)
| U (3)
| U (3)
| U (3)
| U (3)
|
Rear-facing seat Groups 0+ and 1 | < to 13 kg and 9 to 18 kg | X | U (1)
| U (4)
| U (3)
| U (3)
| U (3)
|
Forward-facing seat Group 1 | 9 to 18 kg | X | U | U (4)
| U (4)
| U (4)
| U (4)
|
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | X | U / B2 | U/B2 / B3 (4)
| U/B2 (4)
| U/B2 / B3 (4)
| U/B2 (4)
|
X = Seat not suitable for fitting this type of child seat.
U = Seat allowing a child seat with "Universal" approval to be attached by seat belt:
check that it can be fitted.
B2 = Seat allowing a child seat with "B2" approval to be attached by seat belt: check that it can be fitted.
B3 = Seat allowing a child seat with "B3" approval to be attached by seat belt: check that it can be fitted.
WARNING
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that the
Airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
(2) A carrycot can be installed across the vehicle and will take up at least two seats.
Position the child with his or her feet nearest the door.
(3) In order to install a rear-facing child seat, move the front seat as far forward
as possible, then move the front seat back as far as it will go, without allowing
it to come into contact with the child seat.
(4) To fit a forward-facing child seat, position the back of the child seat in contact
with the vehicle seatback. In all situations, remove the rear headrest of the seat
on which the child seat is positioned. This action must be performed before fitting
the child seat REAR HEADRESTS. Do not push the seat in front of the child more than halfway back on its runners
and do not recline the seatback more than 25°.