New Renault Duster

The presence and operation of the display and indicators DEPENDS ON THE LEVEL OF EQUIPMENT AND THE COUNTRY.

Instrument panel A

lights up when the driver’s door is opened. In some cases, the appearance of a warning light is accompanied by a message.

Selection of views

Depending on the vehicle, several views may be available on the instrument panel. To select a view, press control 1 as many times as necessary to scroll through the different views on the instrument panel A until you reach the desired view.

All of the available views display the following essential information on the instrument panel:

• speedometer;
• the information on the activated driving aids;
• information area.

The "Minimal" view displays only the essential information on the instrument panel.

The "Classic" view displays essential information, the rev counter and the power meter (depending on the vehicle) on the instrument panel.

The "Driving Aids" view displays detailed and instantaneous information related to the activated driving aids on the instrument panel. For example, the proximity of a white line or being too close to the vehicle in front.

The "Navigation" view displays the essential information and the road map duplicated from the multimedia system on the entire instrument panel.

Information display

Speedometer 2

Information on driving aids 3

Estimated range with remaining fuel 4

The value is displayed after driving 400 metres Journey settings.

Fuel gauge 5

If the level is at the minimum, warning light integrated in the indicator comes on orange, accompanied by a beep.

Fill the tank with at least 1.76 gal (8 litres) of fuel.

Coolant temperature indicator 9

In normal use, the indicator 9 should be located before zone 8.

Under "intensive" operating conditions, the needle may approach this zone.

This is not serious unless the warning light comes on accompanied by a message on the instrument panel and a beep.

Information area 7

Depending on the vehicle, use control 10 or 11 to browse and select the various widgets on the instrument panel:

• trip computer information (mileage recorder, warning messages, etc.);
• multimedia information (audio source currently playing, etc.);
• ...

Instrument panel B

lights up when the driver’s door is opened. In some cases, the appearance of a warning light is accompanied by a message.

Selection of views

Depending on the vehicle, several views may be available on the instrument panel. To select a view, press control 1 as many times as necessary to scroll through the different views on the instrument panel B until you reach the desired view.

All of the available views display the following essential information on the instrument panel:

• speedometer;
• the information on the activated driving aids;
• information area.

The "Minimal" view displays only the essential information on the instrument panel.

The "Classic" view displays essential information, the rev counter and the power meter (depending on the vehicle) on the instrument panel.

The "Driving Aids" view displays detailed and instantaneous information related to the activated driving aids on the instrument panel. For example, the proximity of a white line or being too close to the vehicle in front.

Information display

Over Speed Warning Beep

(Depending on the vehicle)

Primary Warning:

When vehicle speed exceeds around 80 km/h (50 mph), with a beep sounds for every 2 minutes until the driver reduces the speed less than 80 km/h (50 mph)

Secondary Warning:

When vehicle speed exceeds around 120 km/h (75 mph), with a beep sounds for every 2 seconds until the driver reduces the speed less than 120 km/h (75 mph), after which it will switch to the primary warning.

Driving mode selected 12

Rev counter 13

(scale x 1,000)

This is displayed differently according to how the instrument panel is customised. Depending on the style selected, it may not be displayed.

Speedometer 14

Depending on the style selected, the display varies.

Total mileage recorder 15Journey settings

Coolant temperature indicator 18

In normal use, the indicator 18 should be located before zone 17.

Under "intensive" operating conditions, the needle may approach this zone.

This is not serious unless the warning light comes on accompanied by a message on the instrument panel and a beep.

Estimated range with remaining fuel 19

The value is displayed after driving 400 metres Journey settings.

Fuel gauge 20

If the level is at the minimum, warning light integrated in the indicator comes on orange, accompanied by a beep.

Fill the tank with at least 1.76 gal (8 litres) of fuel.

Information area 16General information

Depending on the vehicle, use control 21 or 22 to browse and select the various widgets on the instrument panel:

• trip computer information (mileage recorder, warning messages, etc.);
• multimedia information (compass, audio source currently playing, etc.);
• ...

Direction change indicators 23

Warning light 24

Tyre low pressure warning light 25Tyre pressure monitoring system

Warning light airbag26Driver correction devices and aids

Parking brake or Electronic parking brake warning light 27Parking brake

Urgent stop warning light 28

Engine oil level low warning

When the engine is started, the instrument panel display alerts you when the minimum oil level is reachedEngine oil.

The first time the warning appears, it can be cleared by pressing the "OK" switch.

Subsequent warnings will disappear automatically after around 30 seconds.

Instrument panel in miles

(option to switch to km/h)

Vehicles not fitted with a multimedia screen

• With the ignition off, press the 31 switch as many times as required to reach the « Settings » world;
• press the 32 or 31 control repeatedly to reach « Vehicle settings » and press the 32 « OK  » switch;
• press the 32 or 31 control repeatedly to reach « INSTRUMENT PANEL » and press the 32 « OK  » switch;
• press the 32 or 31 control repeatedly to reach the « Unit: km/h » (or « Unit: mph » if required), then press the 32 « OK  » switch.

Vehicles fitted with a multimedia screen.

Please refer to the multimedia instructions to select the unit.

Note: in both cases, once the battery is switched off, the on-board computer automatically returns to the original unit of measurement.

To return to the previous mode, repeat the same operation.

Please refer to the multimedia instructions for further information.