Renault Kwid
Rear side seat belts
Slowly unwind the seat belt 7 and insert the buckle 9 into the catch 8.
warning
Check that the rear seat belts are positioned and operating correctly each time the rear seats are moved.
See information about the rear bench seat on page Rear bench seat.
Rear centre seat belt
Slowly unwind the seat belt 10 and insert the buckle 11 into the catch 12.
tip
The anchorage point 13 is fixed so the seat belt can function properly.
Seat belt catches 8 and 12, as well as the rear central seat belt 10 and the catch 14 are fitted crosswise.
Make sure that they cross each other below the catches and stay in that position while being used.
tip
To avoid buckling in the wrong stalk, the buckles of the rear right and middle seat belts have there own stalks, which are incompatible with each other.
Rear seat belt alert
(depending on vehicle)
The graphic 15 is displayed on the instrument panel in the following two statuses. It informs the driver of the fastening status of each of the rear seat belts whenever:
- when the ignition is switched on;
- there is a change in the fastening status of a rear seat belt;
Interpreting the graphic 15:
- green indicator: seat belt fastened;
- red indicator: seat belt not fastened;
Depending on the vehicle, symbol 15 is displayed when the ignition is switched on, if a rear seat belt changes from fastened to unfastened, or if there is any change of status.
When the vehicle speed is below approximately 12 mph (20 km/h), symbol 15 remains visible for at least 65 seconds.
When the vehicle speed reaches or exceeds approximately 12 mph (20 km/h), if any of the rear seat belts are not fastened or become unfastened during driving:
- an sound signal is emitted during 35 seconds;
- the symbol 15 is displayed for at least 65 seconds and the indicator for the corresponding seat changes to red.