Renault Kwid

To open, pull the handle 1.

Unlocking

To unlock, gently lift the bonnet and push the tab 2 in the direction of the arrow A to release the catch 3.

Opening

Raise the bonnet; release the strut 4 and fit it into hole to hold the bonnet open.

Closing

To close the bonnet, remove the strut 4 from the hole and fit it into its housing; lower the bonnet to a height of 30 cm above the closing position and release it. It will close under its own weight.

warning

Avoid leaning on the bonnet: risk of involuntary closure.

warning

Proceed with caution when working near the engine, as it may be hot. In addition, the engine cooling fan may start to operate at any moment. The symbol in the engine compartment reminds you of this.

Risk of injury.

warning

In the event of even a slight impact involving the radiator grille or bonnet, have the bonnet lock checked by an Approved Dealer as soon as possible.

warning

When working on the bonnet, ensure that the windscreen wiper stalk is in the off position.

Risk of injury.

warning

Make sure the bonnet is correctly locked in place.

Ensure that nothing is preventing the locking mechanism (grit, a cloth, etc.).

warning

Following any procedure in the engine compartment, make sure that you have not forgotten anything (a cloth, tools, etc.).

If something is left in the engine compartment, this may lead to engine damage or cause a fire.