Long chassis version

Second row rear seats

The rear seats are separate seats.

To move the seats forwards or backwards

Standard chassis version

To fold down the seatback

Ensure that the front seats are far enough forward.

Before moving the bench seat, ensure that no objects are present on the floor and that nothing will obstruct the manoeuvre.

Standard chassis version

(5-seater)

To raise it

Slide it to the required height.

To lower it

Pull it towards you and slide it to the required height.

To remove the headrest

To move a seat forwards or backwards

Depending on the seat, lift the bar 1 or handle 4 to unlock the seat. Release the handle at the desired position and make sure that it is locked.

To remove the headrest

Raise it to its highest position (tilt the seatback backwards if necessary). Press the button 3 and lift the headrest to release it.

Operating principle

After the vehicle is started, the system automatically locks the doors when you reach approximately 6 mph (10 km/h).

The door can be unlocked:

If the remote control or, depending on the vehicle, the card does not work

In some cases, the radio frequency remote control or the card may not work:

• card or radio frequency remote control battery flat, vehicle battery discharged, etc.;
• use of appliances operating on the same frequency as the card (mobile phone, etc.);
• the vehicle is located in a high electromagnetic radiation zone.

It is then possible:

Front doors

Opening from the outside

With the doors unlocked or, depending on the vehicle, the card on you, hold the handle 1 and pull it towards you.