Fitting a radio

<?xml version="1.0" standalone="yes"?>

If your vehicle is not fitted with an audio system, one can be fitted and locations have been provided for:

  • the front speakers 1 and 2;
  • the rear speakers 3.

To install any equipment, please consult an approved dealer.

Chapter

Fuses

<?xml version="1.0" standalone="yes"?>

Fuse box

15014_HJF_001_1_image.jpeg

If any electrical component does not work, check the condition of the fuses.

Unclip flap A using the groove 1.

Chapter

Wiper blades: replacement

<?xml version="1.0" standalone="yes"?>

Replacing windscreen wiper blades 2

15003_HJF_004_1_image.jpeg

To replace the wipers, first put them in the service position B.

Engine running or ignition on:

Chapter

Exterior lighting: replacing bulbs

<?xml version="1.0" standalone="yes"?>

Front headlights: replacing the bulbs

15019_HJF_001_1_image.jpeg

Daytime running lights/side lights, direction indicators 1 LED

Consult an approved dealer.

Chapter

Battery: breakdown recovery

<?xml version="1.0" standalone="yes"?>

To avoid all risk of sparks:

  • Ensure that any power consumers (courtesy lights, etc.) are switched off before disconnecting or reconnecting a battery;
  • when charging, switch off the charger before connecting or disconnecting the battery;
  • do not place metal objects on the battery as this could create a short circuit between the terminals;
  • always wait at least one minute after the engine has been switched off before disconnecting a battery;
  • make sure that you reconnect the battery termi

Chapter

Towing: breakdown

<?xml version="1.0" standalone="yes"?>

The speed specified by current legislation for towing must always be observed.

Before towing a vehicle or recovering a vehicle on a flatbed, depending on the case, ensure that the gear control is in neutral position (position N and/or that the parking brake is released.

Observe the following instructions:

Chapter

Wheel trims, wheel trim – wheel

<?xml version="1.0" standalone="yes"?>

Wheel trim with visible wheel bolts

15011_HJF_002_1_image.jpeg

Remove it using the hubcap tool 1, inserting the tool into the valve recess 2.

Chapter