Display Link - Navi Link

do dnes

Selecting a wavelength

To choose a waveband:

  • Press 1;
  • Select the "FM", "AM" or "DAB" band (digital radio, on equipped vehicles) by pressing the band desired.

Choose a radio station " FM ", " AM " or " DAB ".

There are different modes for choosing a radio station.

After selecting the waveband, select the mode by pressing the tabs 7, 8 or 9.

Several search methods are provided:

  • "Frequency" mode (9 tab);
  • "List" mode (tab 8);
  • "Presets" mode (tab 7).

These modes can be changed using the steering column control.

Note: the 4 marker indicates the position in your saved list of the radio station currently playing.

"Frequency" Mode

This mode enables you to search for stations either manually or automatically by scanning the selected frequency range. Select "Frequency" mode by pressing 9.

To scan the frequency range:

  • manually run through the frequencies in steps by repeatedly pressing 3 or 5;
  • automatically go to the next station by pressing 2 or 6;

Repeat the operation each time the search stops if necessary.

You can also move the control knob on the steering column control to move to the next station.

Note: to go back to the welcome screen, press the 10 button.

"List " mode

Select "List" mode by pressing 14.

This operating mode allows you to find a station easily by name from an alphabetical list (on "FM" and "DAB" only).

Select the station required by pressing zone 12.

Press 13 to scroll through all the stations.

Note: the symbol 11 indicates the station you are currently listening to.

The names of the radio stations that do not use RDS will not appear on the screen. Only their frequency is displayed and sorted at the end of the list.

Updating the list

From "List" mode, press 15 to update the list of available radio stations.

The 15 symbol appears on the first page in the "List" mode.

Note: preferably update the "DAB" list as soon as your system is switched on.

"Presets " mode

Select "Presets" mode by pressing 18.

This mode allows you to recall on demand those stations which you have already stored (refer to information on "Saving a station" in this section).

Press one of the buttons in zone A to choose the saved stations.

Note: to go back to the welcome screen, press the 10 button.

Storing a station

Select a radio station by using one of the modes described above. Press and hold one of the buttons on the zone A.

You can save up to twelve stations per waveband. If you change the region via the "RDS" function, the stored stations are not automatically updated. You must again store the station currently playing.

Note: the symbol 16 indicates the station you are currently listening to.

To move to the next page, press button 17.

Radio settings

Display the settings menu by pressing 19. You can activate or deactivate functions by pressing "ON" or "OFF" (the configuration menu changes according to the band).

The available functions are as follows:

  • « RDS » ;
  • « AF » ;
  • "TA" (traffic information);
  • « Region » ;
  • "Info";
  • « AM » ;
  • « DLS » ;
  • "Announcement";
  • ...

« RDS »

The "RDS" function receives information transmitted by the radio station currently playing.

Your system may display the name of the radio station and text messages as well as receive traffic warnings or other information.

When the "RDS" function is activated, frequency retuning (AF) is automatically activated.

Traffic information is generally sent via "RDS".

Note: not all radio stations offer this possibility.

Poor reception can sometimes cause erratic and annoying changes in frequency. In this case you should deactivate the automatic frequency retuning.

"AF" (depending on the country)

The frequency of an FM station changes according to the geographical area. Some stations use the RDS system, mainly for automatic retuning of the AF frequency during car trips.

"TA" (traffic information)

When this feature is activated, your multimedia system searches for and plays traffic bulletins automatically as new reports are issued by some "FM" and "DAB" radio stations.

Note: the automatic broadcasting of traffic information is deactivated when the audio system is set to the "AM" band.

Select a radio station which broadcasts traffic information. If you are listening to music from another source (USB flash drive, Bluetooth® etc.), the system automatically switches to the radio if a traffic announcement is received.

Traffic information is broadcast automatically and has priority over the source being listened to at the time.

Select "ON" to activate this function or "OFF" to deactivate it.

« Region »

This setting enables the reception of specific regional programs. It temporarily deactivates automatic frequency retuning (AF) on a radio which uses regional frequencies.

The listener can keep listening to their program even if receiving a lesser signal.

Note:

  • the "Region" setting only applies to the radio station currently playing;
  • some radio stations broadcast on regional frequencies. In this case:
  • with "Region" activated: the system will not switch to the transmitter for the new region, but the system will switch normally between the transmitters of the initial region;
  • "Region" deactivated: the system will switch to the transmitter for the new region, even if the broadcast program is different.

"Info"

When this function is activated, it is possible to automatically listen to news as it is broadcast by certain "FM" or "DAB" radio stations.

If you then select the other sources, when a broadcast of the selected programme type is made, it will interrupt the other sources.

Select "ON" to activate this function or "OFF" to deactivate it.

« AM »

You can activate or deactivate the "AM" band.

Select "ON" to activate this function or "OFF" to deactivate it.

« DLS »

Availability depends on the vehicle and country. Only in "DAB".

Some radio stations broadcast text information relating to the programme being aired (the title of a track, for example).

"Updating the list"

To update the list of stations and obtain the most recent ones, press “Start”.

Note: preferably update the "DAB" list as soon as your system is switched on.

« Simulcast »

Depending on the country, this function switches from a DAB station to the equivalent FM station if the digital signal is lost.

If the "FM/DAB simulcast" is activated, there may be lag of a few seconds when switching from FM to DAB or from DAB to FM and there may be a difference in the sound volume.

The system will automatically switch back to DAB as soon as the digital signal is received.

Note: during the simulcast, the station name is preceded by "FM>".

"Priority to DAB"

Depending on the country, this function allows you to select an FM station (if the radio station requested is also available in digital) and switch to the equivalent DAB station to obtain better sound quality.

Note: while DAB is prioritised, the station name is preceded by "DAB>".

"Slideshow"

Depending on the country, this function allows you to display information on the programme, music or weather instead of the logo when listening to some DAB radio stations.

Depending on the digital radio station being listened to, it may send images containing visual information about these elements.

Note: this information is only available for some radio stations.