Display Link - Navi Link

til i dag

Operation

When shifting into reverse gear (and up to approximately five seconds after shifting to another gear), a view of the surroundings behind the vehicle is displayed on the multimedia system screen accompanied by the guide, a silhouette of the vehicle and a sound signal.

Ultrasonic sensors installed in your vehicle "measure" the distance between the vehicle and an obstacle.

When the red zone is reached, use the bumper image to stop accurately.

Note:

  • for more information on using Park Assist, please see the vehicle user manual;
  • ensure that the reversing camera is not obscured (dirt, mud, snow, etc.);
  • once the reverse gear is engaged, the multimedia screen displays a view of the area behind the vehicle for several seconds.

Activation/deactivation

Reversing camera

You can activate/deactivate the reversing camera. To do this, from the home screen select "Vehicle", "Vehicle Settings", 1 and then press the "Parking Aids" 2.

Note: the reversing camera display is no longer available (it is replaced by a black screen) when the vehicle speed is above approximately 6 mph (10 km/h), depending on the local legislation.

"Parking aids"

This menu allows you to activate/deactivate the reversing camera and set up "Obstacle detection".

"Obstacle detection"

Depending on the vehicle, you can activate or deactivate your vehicle's front and/or rear sensors independently. Select "ON" to activate the desired sensor(s) or "OFF" to deactivate it/them.

Sound settings

You can activate/deactivate the audio alert and select from several sounds as well as adjust the volume of the obstacle sensors.

Display settings

You can access the display settings with the 3 button.

From this menu you can activate/deactivate the fixed 4 or mobile 5 (depending on the vehicle) guide lines that indicate the distance behind the vehicle, and you can adjust the screen settings.

Press "+" or "˗" to adjust the contrast 6, brightness 7 and colours 8.

warning

For safety reasons, carry out these operations when the vehicle is stationary.

warning

This function is an additional aid. It cannot, therefore, under any circumstances replace the vigilance or the responsibility of the driver.

The driver should always be ready for sudden incidents while driving: always ensure that there are no small, narrow moving obstacles (such as a child, animal, pushchair, bicycle, stone, post, etc.) in the blind spot when manoeuvring.

tip

The screen shows a reverse image.

The gauges are a representation projected onto flat ground. This information must not be taken into account when superimposed on a vertical object or an object on the ground.

Objects which appear on the edge of the screen may be deformed.

In very bright light (snow, vehicle in sunshine, etc.), the camera vision may be adversely affected.