New Renault Duster

bis Heute

Trip computer A or B

Depending on the vehicle, it allows the following functions to be displayed in zone 5. Select the functions by repeatedly pressing switch 2 or 3:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (related to the 1_ALL_040_1_pictogramme.png warning light);
  • ECO monitor;
  • guidance information;
  • media information (instrument panel A only).

Zone 5 is customisable using switch 1 and displays the following functions:

  • rev counter;
  • driving aids;
  • navigation (instrument panel A only).

Vehicle fitted with instrument panel A

Vehicle fitted with instrument panel B

Selections for display in zone 6

(the display depends on the vehicle equipment and country):

a) Trip log, operating fault and information message readout;

b) Trip settings:

  • average fuel consumption;
  • current fuel consumption;
  • estimated mileage with remaining fuel;
  • mileage;
  • average speed;

c) total mileage and trip mileage recorder and average speed;

d) reset the tyre pressures;

e) distance before service:

  • distance before service;
  • distance before oil change.

f) estimated range with remaining reagent;

g) ECO monitor;

h) guidance information;

i) media information (instrument panel A only);

Resetting the trip mileage recorder and journey parameters (reset button)

With one of the trip settings selected as the display, press and hold switch 4"OK " until the display resets to zero.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel.

This range takes into account the average fuel consumption since the last time the reset button was pressed.

However, average consumption can decrease when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.