Display Link - Navi Link

Multi-Sense menu

On vehicles fitted with this, from the main menu press "Vehicle" then "Multi-Sense". This menu lets you customise the behaviour of some on-board systems.

Selecting mode

You can select the modes using the control on your vehicle. For further information, refer to the vehicle user manual.

Available modes may vary according to the vehicle and equipment level. From the "Multi-Sense" menu, select the mode 1 desired:

  • "My Sense" or "Normal", depending on the vehicle;
  • « Sport » ;
  • « Eco ».

Note: the last mode is not memorised when restarting the vehicle. By default, the vehicle restarts in either My Sense or Normal mode.

Mode Sport

This mode enables an increased responsiveness from the engine and the gearbox. The steering is firmer.

Mode Eco

Eco mode focuses on energy saving. The steering is smooth, engine and gearbox management reduce fuel consumption.

Mode My Sense or Normal

MySense, or Normal mode (depending on the vehicle) adopts your vehicle's standard settings by default. Depending on the vehicle equipment level, it is possible to manually reconfigure My Sense mode by modifying the driving, comfort and ambient lighting settings.

Mode configuration

Press "Mode configuration" 2 to customise the following different settings:

  • "Steering";
  • « Climate » ;
  • "Ambient lighting";
  • "Instrument panel appearance";
  • « Intensity » ;
  • « Ambiance ».

Note: certain "Multi-Sense" configuration settings are restricted according to your vehicle category and equipment level. These menus remain visible on the multimedia screen but are unavailable.

warning

For safety reasons, carry out these operations when the vehicle is stationary.

"Steering" 3

This setting offers several steering response modes:

  • « Comfort » ;
  • « Normal » ;
  • « Sport ».

Depending on the mode selected, the steering sensitivity can be adjusted to become heavier or more reactive in order to provide optimal balance between a smooth and accurate steering experience.

« Climate » 4

This setting offers several air conditioning operating modes:

  • « Eco » ;
  • "Neutral";

Depending on the mode selected, you will be offered the optimal balance between temperature comfort and fuel economy.

For further information on the air conditioning settings, which depend on the equipment level, refer to the section on "Climate" in your vehicle user manual.

"Ambient lighting"

This setting can be used to choose the ambient lighting colour type for your vehicle.

To change the ambient colour in your vehicle, select one of the colours 5 from those available.

« Intensity » 7

This setting enables you to adjust the brightness of the ambient lighting in your vehicle. To do this, press "+" or "˗".

« Ambiance » 8

The selected colour and intensity can be applied to the following areas:

  • « Instrument panel » ;
  • « Front » ;
  • « Rear ».

Press "On" or "Off" to activate/deactivate the ambient lighting in the area selected.

« Reset » 6

This option enables you to reinitialise the default values for the current mode.