Renault Kardian

Depending on the vehicle equipment, this function allows you to activate/deactivate and adjust some of the vehicle's functions.

Vehicles fitted with a multimedia screen 1

Accessing the settings menu

Refer to the various multimedia instructions for information on accessing the settings.

Adjusting the settings

Select a menu then the function to be modified (the display depends on the vehicle equipment and country):

a) "ACCESS":

• Unlocking the driver’s door;
• Lock doors during driving;
• Opening/closing in "hands-free mode";
• Remote locking/approach unlocking;
• Remote locking sound;
• Silent mode;
• Automatic locking.

b) "Wipers":

• Automatic front wiping.

Depending on the function, select:

• "ON" or "OFF" to activate or deactivate it.

Please refer to the multimedia instructions for further information.

Vehicles not fitted with a multimedia screen

Accessing the settings menu on display 2

With the vehicle stopped, press the switch 3 as many times as required to reach the "Settings" tab. Press repeatedly using the 4 or 5 control, then if necessary use the "Vehicle setting", switch to confirm 6 "OK".

Adjusting the settings

Navigate using control 4 or 5 to select the function to be modified and press control 6 "OK" to confirm (display may vary according to vehicle equipment and country):

a) "DASHBOARD":

• Language;
• Unit.

b) "PARKING ASSIST":

• Beep volume.

c) "DRIVING ASSIST":

• Lane departure warning sound volume;
• Blind spot;
• Active braking;
• Speed warning.

d) "ACCESS":

• Unlocking the driver’s door;
• Lock doors during driving;
• Opening/closing in "hands-free mode";
• Remote locking/approach unlocking;
• Remote locking sound;
• Silent mode;
• Automatic locking.

e) "WIPERS":

• Automatic front wiping.

f) "RESET".

function activated

function deactivated

Once a line has been selected, press the switch 6 "OK" to modify the function.

If you select either "PARKING ASSIST" then "VOLUME" or "DASHBOARD" then "LANGUAGE", you will have to make a further selection (Park Assist sound volume or instrument panel language). In this case, make your selection and confirm it by pressing the switch 6 "OK", the selected value is shown by a in front of the line.

To exit the menu, press 4 or 5 to access "BACK" and confirm by pressing 6 "OK". It may be necessary to carry out this operation more than once.

Please refer to the radio instructions for further information.