To open the bonnet, pull the handle 1 located on the left-hand side of the dashboard with a door open.

Unlocking the bonnet catch

To unlock, gently lift the bonnet and push the tab 4 in the direction indicated by the arrow A to release the catch 2.

warning

Before carrying out any operation in the engine compartment, you must switch off the ignition Ignition-starter switch on a vehicle with keyIgnition-starter switch on a vehicle with card.

Opening the bonnet

14003_HJF_002_1_image.jpeg

Lift the bonnet and release the stay 7 from its latch 3 and, for your safety, set it to the position 6 indicated by the mark 5.

warning

Do not press down on the bonnet as there is a risk that the bonnet may accidentally close.

Closing the bonnet

Check that nothing has been left in the engine compartment.

To close the bonnet, refit the stay 7 into its mounting 3, hold the bonnet in the middle then lower the bonnet to 30 cm above the closed position before letting go. It will lock automatically under its own weight.

warning

Please note when working close to the engine that it may be hot. The engine cooling fan may also start at any moment. The 2_ALL_290_1_pictogramme.png label in the engine compartment reminds you of this.

Risk of injury.

warning

When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.

Risk of injury.

warning

Never activate the remote engine start-up function or its programming before opening the bonnet or when it is open.

Risk of burns or serious injury.

warning

After any procedure in the engine compartment, make sure that you do not forget anything (cloth, tools, etc.).

Otherwise, this may lead to engine damage or cause a fire.

warning

Ensure that the bonnet is properly locked.

Ensure that nothing is preventing locking (grit, cloths, etc.).

warning

In the event of even a slight impact involving the radiator grille or bonnet, have the bonnet lock checked by an approved dealer as soon as possible.