Renault Kardian
Wheel trim with visible wheel bolts
Remove it using the hubcap tool 1, inserting the tool into the valve recess 2.
To refit it, align it with the valve 2. Push the retaining hooks in fully, starting on the side of valve A, followed by B and C, finishing at the side opposite valve D.
warning
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, make sure the tools are correctly positioned in their housings: avoid the risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.
warning
For your safety, the use of a jack not recommended by the manufacturer is strictly prohibited.
The jack is specific to the vehicle and used to change the wheels.
Under no circumstances should it be used:
- on another vehicle;
- to carry out a repair;
- to access the underside of the vehicle.
Risk of injury.
Risk of damage to the vehicle.