Trip computer A or B

Depending on the vehicle, this includes the following functions:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (related to the 1_ALL_040_1_pictogramme.png warning light);
  • vehicle settings customisation menu Vehicle settings personalisation menu.

Vehicle fitted with trip computer A

  • With the vehicle stationary, press the switch 1 as many times as required to reach the 2_ALL_416_1_pictogramme.png  tab;
  • press switch 4 "OK";

Select the function by repeatedly pressing switch 2 or 3 and press the switch 4 "OK" to confirm.

Press switch 5 to return to the previous menu (the display depends on the vehicle equipment and country):

f) Trip log, operating fault and information message readout;

b) Trip settings:

  • average fuel consumption;
  • current fuel consumption;
  • estimated mileage with remaining fuel;
  • mileage;
  • average speed;
  • average LPG consumption;
  • estimated range with remaining LPG fuel;
  • LPG distance;

c) total mileage and trip mileage recorder and average speed;

d) reset the tyre pressures;

e) set the time;

f) mileage before service:

  • distance before service;
  • distance before oil change.

g) estimated range with remaining reagent.

Vehicle fitted with trip computer B

Depending on the vehicle, it allows the following functions to be displayed in zone 6. Select the functions by repeatedly pressing switch 2 or 3:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (related to the 1_ALL_040_1_pictogramme.png warning light);
  • ECO monitor;
  • depending on the vehicle, energy flow;
  • vehicle inclinations and compass;
  • guidance information.

Zone 7 can be customised using switch 1 and displays the following functions;

  • rev counter or, depending on the vehicle, charge meter;
  • driving aids.

Selections for the display in zone 6

(the display depends on the vehicle equipment and country):

f) Trip log, operating fault and information message readout;

b) Trip settings:

  • average fuel consumption;
  • current fuel consumption;
  • estimated mileage with remaining fuel;
  • mileage;
  • average speed;
  • average LPG consumption;
  • estimated range with remaining LPG fuel;
  • LPG distance;

c) trip mileage recorder and average speed;

d) reset the tyre pressures;

e) distance before service:

  • distance before service;
  • distance before oil change.

f) estimated range with remaining reagent;

g) ECO monitor;

h) guidance information;

Resetting the journey parameters (reset button)

With one of the journey parameters selected on the display, press button 2 or 3 until the display resets.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.

For the first few miles after pressing the reset key you will notice that the range increases as you travel.

This range takes into account the average fuel consumption since the last time the reset button was pressed.

However, average consumption can decrease when:

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.