Rear seat belts

Rear side seat belts 9

The belts are locked and unlocked in the same way as the front seat belts.

Make sure that the rear bench seat REAR BENCH SEAT: FUNCTIONS is locked in position correctly so that the rear seat belts will operate correctly.

Check that the rear seat belts are positioned and operating correctly each time the rear bench seat is moved.

Centre seat belt

Unwind belt 15 slowly from its housing 10.

Pass the two buckles and the belt 15 in the belt guide 11.

Click the smaller fixed buckle into the catch with the black locking button 12.

Click the larger sliding buckle 14 into the catch with the red unlocking button 13.

This version differs in that it has rear seatbelts and headrests on the rear side seats only.

Check that the rear seat belts are positioned and operating correctly each time the rear bench seat is moved.

The following information applies to the vehicle’s front and rear seat belts.

No modification must be made to the originally-fitted restraint system components (seat belts, seats and their mountings). For special operations (e.g. fitting a child seat), please contact an approved dealer.
Do not use any devices which slacken the belts (e.g. clothes peg, clip, etc.) as a seat belt which is worn too loosely may cause injury in the event of an accident.
Never wear the shoulder strap under your arm or behind your back.
Never use the same belt for more than one person and never hold a baby or child on your lap with your seat belt around them.
The belt should never be twisted.
Following an accident, have the seat belts checked and replaced if necessary. Always replace your seat belts as soon as they show any signs of wear.
When positioning the rear bench seat, make sure that the seat belts and buckles are correctly positioned so that they can be used properly.
Make sure that the seat belt buckle is inserted into the appropriate catch.
Ensure that no objects are placed in the area around the seat belt catch as they could prevent it from being properly secured.
Make sure the seat belt catch is properly positioned (it should not be hidden away, crushed or flattened by people or objects).