Attachment by seat belt

Fitting diagram

WARNING
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear facing child seat on the front passenger seat, check that the airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
img_2_all_046_1.svg
Seat not suitable for fitting child seats.
Child seat attached using the belt
Seat equipped for attaching a "universal" approved seat using a seatbelt.
Seat enabling a child seat with "B2" approval to be fitted.
Seat enabling a child seat with "B3" approval to be fitted.
WARNING
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.

Installation table

The table below contains the same information as the two diagrams on the previous pages (fixed bench seat version and sliding bench seat version) in order to comply with current regulations.
Type of child seat
Weight of the child
Front passenger seat (7)
2nd row rear side seats (7)
2nd row rear centre seat (7)
Row 3 rear seat (depending on vehicle)
With airbag deactivated
With airbag activated
Carrycot fitted across the vehicle
Group 0
< 10 kg
X
X
U (2)
X
X
Rear-facing shell seat
Groups 0 or 0 +
< 10 kg and < 13 kg
U (1) (6)
X
U (3)
U (3)
U (5)
Shell seat/rear-facing seat
Groups 0+ and 1
< to 13 kg and 9 to 18 kg
U (1) (6)
X
U (3)
U (3)
U (5)
Forward-facing seat
Group 1
9 to 18 kg
X
U (6)
U (3) (4)
U (3) (4)
U (5)
Booster seat
Groups 2 and 3
15 to 25 kg and 22 to 36 kg
X
U , B2 , B3 (6)
U , B2 (3) (4)
U (3) (4)
U (5)
WARNING
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that theairbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
X = Seat not suitable for fitting child seats of this type.
U = Seat enabling a child seat with "Universal" approval to be attached by seat belt: check that it can be fitted.
B2 = Seat enabling a child seat with "B2" approval to be attached by seat belt: check that it can be fitted.
B3 = Seat enabling a child seat with "B3" approval to be attached by seat belt: check that it can be fitted.
(2) A carrycot can be installed across the vehicle and it will take up at least two seats. Position the child with his or her feet nearest the door.
(3) If necessary, position the vehicle seat as far back as possible and raise the seatback (by approximately 25°). In order to install a rear-facing child seat, move the front seat as far forward as possible, then move the front seat back as far as it will go, without allowing it to come into contact with the child seat.
( 4 ) In all situations, remove the headrest of the rear seat on which the child seat is positioned. This must be done before fitting the child seat. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.
(5) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
WARNING
(6) RISK OF DEATH OR SERIOUS INJURY: a child seat with a support leg must never be fitted.
WARNING
(7) Deactivate the "Easy Access Seat" function before installing a child seat on the front passenger seat and/or on the rear seats.
Risk of injury.