X61VE

a) Total mileage and trip mileage recorder.

101778 km

112,4 km

Consumption

b) Journey parameters.

Energy consumed since the last reset.

20 kWh

Average

Average energy consumption since the last reset.

The value is displayed after having travelled at least 400 metres since the last reset.

18,5 kWh/100km

INSTANT CONSO

Current energy consumption.

+ 12 kW

Range

Estimated range with remaining energy.

The information disappears when the battery is at less than approximately 4%.

118 km

Distance

Distance travelled since the last reset.

522 km

Average

Average speed since the last reset.

The value is displayed after driving 400 metres.

48 km/h

Consumption

Total energy usage since vehicle first entered service.

487 kWh

SERVICE IN

c) Service interval.

Distance remaining until the next service (displayed in kilometres), then when the service nears, several scenarios are possible:

- distance/time remaining less than 900 miles (1,500 km) or one month: the message “SERVICE IN” is displayed, together with the nearest distance or time;

- interval equal to 0 miles (0 km) or service date reached: the message “SERVICE PROMPTLY” is displayed accompanied by warning light ©.

The vehicle requires a service as soon as possible.

1936 km

Resetting the display after the service in accordance with the maintenance schedule.

The service interval must only be reset after a service which complies with the recommendations in the maintenance schedule.

Special note: to reset the service interval, press and hold one of the display reset buttons for approximately 10 seconds until the display shows the mileage permanently.

SPEED LIMITER

d) Cruise control/speed limiter programmed speed. Please refer to the “Cruise control/speed limiter” information in Section 2.

90 km/h

CRUISE CONTROL

90 km/h

TYRE PRESSURE ACQUISITION

SEt PP

e) Reset the tyre pressures.

Please refer to the information on the “Tyre pressure loss warning” in Section 2.

f) Trip log.

Successive display:

- information messages;

- operating fault messages.

Refer to the information on the “Trip Computer: information messages” and “Trip Computer: operating fault messages” in section 1.

NO MESSAGE AVAILABLE