Attachment using the ISOFIX system

Fitting diagram

Front passenger seat version equipped with ISOFIX system (front seats with electric controls)

WARNING
RISK OF DEATH OR SERIOUS INJURY:
before fitting a rear facing child seat on the front passenger seat, check that the airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
Tip
For the front passenger seat, the use of a child seat with a floor support is recommended to avoid triggering the seat belt warning signal.
img_2_all_046_1.svg
Seat which does not allow a child seat to be fitted.
Child seat attached using theISOFIX system
img_3_all_086_1.svg Seat which allows an ISOFIX child seat to be fitted.
The rear seats are fitted with an anchorage point which allows a front-facing ISOFIX child seat with universal approval to be attached. The anchoring points are located on the passenger seatback for the front seat and on the bench seatback for the rear seats.
WARNING
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.
WARNING
Fit the child seat in a rear seat wherever possible.
To install an ISOFIX seat in this seat, unbuckle the seat belt by hand before engaging the bolts.
WARNING
Fitting a seat ISOFIX in the rear-left seat means the middle seat cannot be used. The central seat belt will no longer be either accessible or useable.

Installation table

The table below summarises the information already shown on the diagram of the front passenger seat version equipped with the system ISOFIX, in order to ensure that the regulations in force are respected.
Type of child seat
Weight of the child
Size of seat [fixture]
Front passenger seat with electric controls (7)
Rear side seats (7)
Rear centre seat (7)
With airbag deactivated
With airbag activated
Carrycot fitted across the vehicle
Group 0
< 10 kg
L1 [F]
L2 [G]
X
X
IL (2)
X
Rear-facing shell seat
Groups 0 or 0 +
< 13 kg
R1 [E]
IL (1) (3)
X
IL (4)
X
Rear-facing seat
Groups 0+ and 1
< to 13 kg and 9 to 18 kg
R3 [C]
R2 [D]
IL (1) (3)
X
IL (4)
X
Forward-facing seat
Group 1
9 to 18 kg
F3 [A]
F2 [B]
F2X [B1]
X
IUF - IL
(3)
IUF - IL
(5)
X
Booster seat
Groups 2 and 3
15 to 25 kg
B2
X
IUF - IL (6)
IUF - IL(5)
X
22 to 36 kg
B3
X
IUF - IL (6)
IUF - IL (5)
X
Seati-Size
Rear-facing seat
i - U (1) (3)
X
i - U (4)
X
Forward-facing seat
X
i - UF (3)
i - U (5)
X
Booster seat
X
i - UF (6)
i - U (5)
X
X = Seat not suitable for fitting child seats of this type.
IUF = Seat allowing a child seat with "Universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
IL = Seat allowing a child seat with "Semi-universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint devices.
i-UF = Suitable only for "Universal" front-facing and rear-facing i-Size restraint devices.
WARNING
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that theairbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
(2) A carrycot can be installed across the vehicle and it will take up at least two seats. Position the child with his or her feet nearest the door.
(3) Move the vehicle seat backwards as far as possible and lower it as much as possible, then tilt the seatback slightly (by approximately 25°).
(4) Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.
( 5 ) In all situations, remove the headrest of the rear seat on which the child seat is positioned. This must be done before fitting the child seat (please refer to the "Rear headrests" pages in Section 3 of the vehicle user manual). Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.
(6)Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
The size of the ISOFIX child seat is indicated by a letter:
  • F3,F2,F2X[A, B, B1]: for forward-facing seats in group 1 (9 to 18 kg);
  • B2: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg);
  • R3, R2[C, D]: rear-facing seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
  • R1[E]: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);
  • L1,L2[F,G]: carrycots in group 0 (under 10 kg).
WARNING
(7) Deactivate the "Easy Access Seat" function before installing a child seat on the front passenger seat and/or on the rear seats.
Risk of injury.

Fitting diagram

Front passenger seat version not equipped with ISOFIX system (front seats with manual controls)

WARNING
RISK OF DEATH OR SERIOUS INJURY:
before fitting a rear facing child seat on the front passenger seat, check that the airbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
Tip
For the front passenger seat, the use of a child seat with a floor support is recommended to avoid triggering the seat belt warning signal.
img_2_all_046_1.svg
Seat which does not allow a child seat to be fitted.
Child seat attached using theISOFIX system
img_3_all_086_1.svg Seat which allows an ISOFIX child seat to be fitted.
The rear seats are fitted with an anchorage point which allows a front-facing ISOFIX child seat with universal approval to be attached. The anchoring points are located on the passenger seatback for the front seat and on the bench seatback for the rear seats.
WARNING
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.
WARNING
Fit the child seat in a rear seat wherever possible.
To install an ISOFIX seat in this seat, unbuckle the seat belt by hand before engaging the bolts.
WARNING
Fitting a seat ISOFIX in the rear-left seat means the middle seat cannot be used. The central seat belt will no longer be either accessible or useable.

Installation table

The table below summarises the information already shown on the diagram of the front passenger seat version not equipped with the next system ISOFIX, in order to ensure that the regulations in force are respected.
Type of child seat
Weight of the child
Size of seat [fixture]
Front passenger seat with manual controls
Rear side seats (7)
Rear centre seat (7)
Carrycot fitted across the vehicle
Group 0
< 10 kg
L1 [F]
L2 [G]
X
IL (2)
X
Rear-facing shell seat
Groups 0 or 0 +
< 13 kg
R1 [E]
X
IL (4)
X
Rear-facing seat
Groups 0+ and 1
< to 13 kg and 9 to 18 kg
R3 [C]
R2 [D]
X
IL (4)
X
Forward-facing seat
Group 1
9 to 18 kg
F3 [A]
F2 [B]
F2X [B1]
X
IUF - IL
(5)
X
Booster seat
Groups 2 and 3
15 to 25 kg
B2
X
IUF - IL(5)
X
22 to 36 kg
B3
X
IUF - IL (5)
X
Seati-Size
Rear-facing seat
X
i - U (4)
X
Forward-facing seat
X
i - U (5)
X
Booster seat
X
i - U (5)
X
X = Seat not suitable for fitting child seats of this type.
IUF = Seat allowing a child seat with "Universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
IL = Seat allowing a child seat with "Semi-universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint devices.
i-UF = Suitable only for "Universal" front-facing and rear-facing i-Size restraint devices.
WARNING
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that theairbag has been deactivated CHILD SAFETY: DEACTIVATING, ACTIVATING THE FRONT PASSENGER AIRBAG.
(2) A carrycot can be installed across the vehicle and it will take up at least two seats. Position the child with his or her feet nearest the door.
(3) Move the vehicle seat backwards as far as possible and lower it as much as possible, then tilt the seatback slightly (by approximately 25°).
(4) Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.
( 5 ) In all situations, remove the headrest of the rear seat on which the child seat is positioned. This must be done before fitting the child seat (please refer to the "Rear headrests" pages in Section 3 of the vehicle user manual). Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.
(6)Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
The size of the ISOFIX child seat is indicated by a letter:
  • F3,F2,F2X[A, B, B1]: for forward-facing seats in group 1 (9 to 18 kg);
  • B2: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg);
  • R3, R2[C, D]: rear-facing seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
  • R1[E]: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);
  • L1,L2[F,G]: carrycots in group 0 (under 10 kg).
WARNING
(7) Deactivate the "Easy Access Seat" function before installing a child seat on the front passenger seat and/or on the rear seats.
Risk of injury.