Renault Trafic 3 phase 1'
On equipped vehicles, the luggage net A can be used, when transporting animals or luggage, to separate them from the passenger section.
It can be positioned:
- behind the front seats;
- behind a rear bench seat.
Fitting the luggage net behind the front seats
Inside the vehicle on each side:
Upper mounting:
- lift and hold the cover 2, using a flat-blade screwdriver, to access the mounting hole,
- fully insert the top rod 1 of the net into the largest section 3 of the hole,
- slide the rod into the lower section 4 of the hole.
Lower mounting:
- attach hook 5 of the luggage strap onto ring 7 at the base of the bench seat,
- adjust the net strap so that it is taut.
Removal
Loosen the strap by lifting adjustment device 6 upwards. Detach the belts.
Fitting the luggage net A behind the rear seats
Inside the vehicle on each side:
Upper mounting:
- lift and hold the cover 2, using a flat-blade screwdriver, to access the mounting hole;
- fully insert the top rod 1 of the net into the largest section 3 of the hole;
- slide the rod into the lower section 4 of the hole.
Lower mounting:
- fix the net belt hook 5 onto the ring 8;
- adjust the net strap so that it is taut.
Removal
Loosen the strap. Detach the belts.
Make sure that the rod end 1 is supported by the metal part and not the plastic part of the cover.