Renault Koleos

■ Center screen air conditioning control and dashboard air conditioning controller

For the center screen control, select the air conditioning/seat button 1 on the left side of the screen. (If the air conditioning function is turned on, the button displays the current air conditioning status.)

2, 25

Betting/Automatic circulation switching

3, 23

Air-conditioning activation control in Auto mode (AUTO)

4

Adjust airflow to small volume

5

Adjust airflow to large volume

6, 26

"Clear view" function

7, 27

De-icing/demisting of the rear screen and the rear view mirrors

8

Adjust air temperature of passenger seat

9

Set alarm for closing window

10

ECO energy saving mode

11

Activation control for the "A/C MAX" function (maximum cooling)

12, 24

Air-conditioning activation control

13

System power ON/OFF

14

Change to rear seat air conditioning setting screen

15

Ankle ventilation mode

16

Upper body ventilation mode

17

Window ventilation mode

18

Synchronization

19

Adjust air temperature of driver seat

20

Adjusting the air temperature

21

Adjust airflow and turn off system (OFF)

22

Passenger compartment air distribution adjustment

▶ Adjusting the air temperature 20

Pressing button 20 down will lower the temperature and raising it will increase the temperature.

The temperature control button 20 changes by 0.5℃ per scale, and the temperature control range is 16℃~28℃.

If the set temperature is lower than 16℃, the display will display LO and the air conditioner will be in the lowest position.

If the set temperature is higher than 28℃, the display will display HI and the air conditioner will be in the highest position.

When the air conditioner is off, operating the air temperature control button 20 will activate the air conditioner.

Note: When adjusting the temperature with button 20, the temperature will be adjusted immediately, but the display on the central screen may be slightly delayed.

▶ Controlling the airflow and turning the system off (OFF) 21

Used to set the airflow manually.

To decrease the airflow, press button 21 down, and to increase the airflow, press button 21 up.

The airflow can be adjusted between levels 1~5 when the air conditioner system is in AUTO mode, and the 'A' mark will appear on the airflow buttons 4 and 5 on the central screen. In addition, when not in ATUO mode or in demisting mode, you can adjust the air volume between levels 1 and 9.

When the air volume is at level 1, pressing the air volume control and system off button 21 will turn off the air conditioning system.

When the air conditioner is off, pressing button 21 will turn on the air conditioning.

When the system starts without starting the vehicle, the fan function can operate for about 2 minutes, and if it exceeds 2 minutes, the fan will stop operating.

▶ Adjusting the distribution of air in the passenger compartment22

When the air conditioner is off, pressing the MODE button 22 will activate the air conditioning.

You can select one of the seven modes.

Press 22 one or more times to select the air distribution.

• Upper body blow (when 16 is selected on the center screen)
• Ankle blow (when 15 is selected on the center screen)
• Window blow (when 17 is selected on the center screen)
• Upper body and ankle blow
• Ankle and window blow
• Upper body and window blow
• All blow

There are seven modes to switch between, and the air is blown from the corresponding vents.

For a comfortable environment, it is recommended to use the upper body blowing mode for cooling in the summer, ankle blowing for heating in the winter, and the automatic function for all seasons.

▶ Auto mode (AUTO) 3, 23

Press AUTO button 3 or 23 to automatically select the temperature based on the perceived temperature.

Press AUTO button 3 or 23 to automatically control the following five functions to reach the desired temperature.

• Bet/Auto circulation
• Air distribution
• Air volume
• A/C (Air conditioning)
• AQS (if equipped)

At this time, press MODE button 22 to adjust manually, or press AUTO button 3 or 23 again, and the indicator light of AUTO button 3 will turn off, and the remaining functions that have not been adjusted manually will continue to be automatically controlled to reach the desired temperature as much as possible.

When the air conditioner is turned off, pressing AUTO button 3 activates the air conditioner and enters AUTO mode, and the temperature is set to the state before turning off the air conditioner.

▶ Air-conditioning activation control12, 24

Pressing button 12 or 24 turns on the air conditioning function and the indicator lights for buttons 12 and 24 come on.

Pressing button 12 or 24 again turns off the indicator lights and turns off the A/C function.

▶ Switch between betting/auto-circulation mode2, 25

You can manually switch between automatic circulation and internal circulation.

The Automatic Air Quality Management System (AQS) automatically adjusts the internal/outdoor air intake status according to the outside air quality when the automatic circulation mode is set.

When the air conditioner is off, pressing the internal/automatic circulation switch button will switch the internal/automatic circulation, although the air conditioner will still be off.

▶ Clear view 6, 26

With the ignition on, direct the airflow toward the windshield to quickly remove fog or frost from the windshield.

Note: For best results, remove all ice and snow from the windshield before demisting.

During demisting, pressing or raising the air volume control button will increase or decrease the air volume accordingly, and the air blowing mode will remain in window air blowing mode.

When using the clear view function, the air volume is set to manual level 6 or higher.

Note: For better demisting effect, do not turn off the air conditioner.

When the air conditioner is off, pressing the heating and demisting button 7 or 27 will activate the air conditioner to perform the heating and demisting functions.

▶Rear screen deicing and demisting 7, 27

Press button 7 or 27 to turn the outside mirror/rear window defroster/defogger on or off.

The button indicator light will light when the outside mirror/rear window defroster/defogger function is activated.

Press button 7 or 27 again to turn the outside mirror/rear window defroster/defogger function off.

Note: Do not use scrapers or sharp tools to remove frost or other foreign matter from the inside of the front or rear windows. Be careful not to damage the rear window defroster heating element. Any repairs resulting from this will not be covered under warranty. Make sure all objects are a safe distance away from the rear window.

▶ Airflow control 4, 5

Press 4, 5 to increase or decrease the airflow by 1 step.

▶ Passenger air temperature control 8 and driver air temperature control 19

Adjust the air temperature of the passenger and driver seats.

Swipe up or down the temperature value to increase or decrease the temperature by 0.5°C. The temperature setting range of the air conditioner is 16°C to 28°C, and temperatures outside the setting range are displayed as follows.

• Above 28℃: HI
• Below 16℃: LO

▶ Window close alarm setting 9

Press button 9 to turn the window close alarm ON/OFF when the air conditioner is in operation.

▶ ECO energy saving mode 10

Press button 10 to turn the air conditioner energy saving mode ON/OFF.

▶ A/C MAX function 11

The "A/C MAX" function allows the user to experience the full power of their air conditioning system.

This function involves automatic modifications:

• temperature programmed to fully cold;
• distribution of air to the occupants;
• air flow at its maximum power;
• activation of the air conditioning.

Press the button 11 to activate the function.

▶ Power ON/OFF 13

Press button 13 to turn on the air conditioner, and when the air conditioner is in operation, press button 13 to stop the air conditioner.

▶ Change to rear seat aAir conditioning setting screen 14

Press button 14 to change from the center screen to the rear seat air conditioning setting screen.

Rear seat air conditioning (air conditioning)

▶ Synchronization 18

Select button 18 to turn on the synchronization mode.

The button is activated and the passenger temperature and rear seat temperature are adjusted according to the driver's seat. Selecting the synchronization button 18 again deactivates the button and cancels the synchronization mode. At this time, the driver's temperature control button 19 no longer affects the passenger temperature and rear seat temperature.

▶ Window ventilation mode 17

All the air is then directed to the windscreen and front side window demisting vents.

▶ Upper body ventilation mode 16

The air flow is mainly directed to the dashboard air vents.

▶ Ankle ventilation mode 15

The air flow is directed mainly towards the footwells.

■ Air conditioning functions when the vehicle is turned off

▶ Automatic vehicle ventilation

When the vehicle is locked for about 3 hours with the vehicle turned off and then unlocked, the outside air intake and automatic ventilation function operates for about 1 minute to ventilate the vehicle interior.

Note: This function operates for about 4 years after purchasing a new vehicle.

▶ Vehicle ventilation using a key

When the vehicle is turned off, if you press and hold the unlock button on the key, the windows will open and the outside air intake and automatic ventilation function will operate for about 1 minute to ventilate the vehicle interior.

▶ After blow

When the AC (air conditioning) function is used for about 30 minutes while driving, the outside air intake and automatic ventilation function will operate for about 1 minute when the vehicle is turned off and locked to remove moisture inside the air vents.