Renault Kardian Latam

Vehicle Systems OK

a) Trip log.

Successive display:

• information messages (passenger airbag OFF, etc.);
• operating fault messages ("Have the injection checked", etc.).

00.0

Km/L

b) Journey parameters

Current fuel consumption

This value is displayed after reaching a speed of 12 mph (20 km/h), depending on the vehicle.

0.0 miles (km)

c) trip mileage recorder distance travelled since the last reset.

Tyre pressure init. long press

d) Resetting the tyre pressureTyre pressure monitoring system..

Service required

10 000 Km / 12 month.

e) Service and oil change interval.

Interval before next service.

With the ignition on, the engine off and the display set to "Range before service". When the distance value approaches its limit, there are a number of possible scenarios:

• range less than 932 miles (1,500 km) or one month: the "Service required" message is displayed accompanied by the nearest limit (distance or time);
• range equal to 0 miles (0 km) or date of next service reached: the "Service required" message is displayed accompanied by the warning light.

The vehicle requires a service as soon as possible.

Service required

300 Km / 24 days

Service required

Resetting to redefine the mileage before the next service, press and hold the OK button for approximately 10 seconds until the display permanently shows the mileage before service.

Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Oil change on

10 000 Km / 12months.

e) Service and oil change interval.

Oil change interval.

With the ignition on and the engine stopped, access the mileage information to view the next oil change interval.

Depending on the vehicle, the mileage between oil changes varies according to the driving style (frequent driving at low speed, short journeys, extensive use at idle speed, towing a trailer etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

Resetting: to rest the mileage before the next service, press and hold the OK button for approximately 10 seconds until the display permanently shows the mileage before the next oil change.

Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.