To access the engine:

- open the tailgate;

- remove the boot carpet A;

- unlock the engine access flap.

As the engine is located under the boot, do not slide or store anything under the boot carpet.

Deactivate the Stop and Start function for any operation performed in the engine compartment.

Unlocking the engine access flap

- Unscrew the six screws 1 using a flat-blade screwdriver or similar;

- lift the flap;

- place it on a clean surface.

Closing and locking the engine access flap

Check that nothing has been left in the engine compartment.

- Take the flap;

- place it on top of the engine;

- tighten the six screws 1 using a flat-blade screwdriver or similar;

- replace the boot carpet A.

The engine may be hot during operations in close proximity. Risk of injury.

Make sure the engine access flap is properly fitted before and during its closure.

Make sure the engine access flap is properly locked in place.

Risk of intoxication from fumes from the engine compartment.

After carrying out any work in the engine compartment, check that nothing has been left behind (cloth, tools, etc.).

These may damage the engine or cause a fire.